|
The “Eliminator” The Ultimate electric heat drying system
The “Eliminator” has a much higher temperature rise while using less electricity than competing. Some units use an air mover. The “Eliminator” has a built in fan, but, you can “also” use a full size air-mover with the Eliminator. This allows you to use the “Eliminator” in the same way you can use a competing unit. Where things become different is when you want to focus heat contained areas. The “Eliminator” outperforms all electric heat systems by producing a higher Delta T temperature rise with less electricity. The “Eliminator” is also NEC compliant on 15 amp circuits and fully duct-able for easy drying of ceilings, interstitial spaces, etc... The “Eliminator” comes standard with a digital thermostat control that lets you set the temperature in the drying area or containment for accurate temperature control. Full power temperature rise is 85+ degrees. If its 50F you will be getting 135+ coming out the Eliminator. Pump that into your tenting for the fastest drying possible. At 70F ambient temperature and using only half power the “Eliminator” will be pumping out approx. 115F right from the start. Half power only requires (2) 15 amp 120V circuits or ½ of a 30 amp 240V dryer plug. This leaves a lot of electricity for your other equipment. The “Eliminator” can be used with all industry accessories. Also, the “Eliminator” can be used more easily with dehumidifiers than any other system. The “Eliminator” is listed in Xactimate.
877-HEAT-601 877-432-8601 (Numerically) |
|
1-877-432-8601 |
|
<option value=" http://www.driheatdryingsystems.com/index_files/EliminatorBrochure.htm">Eliminator Brochure</option> |
