The Energedry ELE 6400 Revolutionized the Restoration Industry

Now the Energedry Eliminator Is the Next Generation Heater

With the Energedry Eliminator you will get the job done fast.  Drying with this system, dehumidification is not needed in most cases, but can be added in some drying situations for even faster drying.

It's a fact of drying that warmer air can hold more water vapor. At 70°F, air can hold twice the moisture of air at 50°F. This particular difference of twenty degrees means that you can evaporate twice the moisture from structural materials. Use the Energedry Eliminator to create "thirsty" air with greater moisture-carrying capacity. The Energedry Eliminator is the most powerful Industry specific electric heat drying system that is totally self-contained and thermostatically controlled. Custom ramp up power feature allows for less energy consumption without compromising performance. Dry walls, carpet, wood floors, cabinets, etc... with ease.

Our Price $1,999.00, Sale Price $1,859.00 +

                FREE SHIPPING to the Lower 48 States

Don’t Miss Out On This Very Special Offer. This Is a Very Limited Time Offer

1-877-432-8601

Eliminator In Action

Energedry  Eliminator Series- Thermal Evaporative Accelerator
• Outperform Dehumidifiers 100% of the time when used with the VapairVent Ventilation System • Works on 115v circuit or 230v splitter with “Ramp Up” power feature that keeps more circuits available for airmovers • up to 96F temperature rise capability allow for proper temperature control in positive, neutral or negative pressures • Digital thermostat w/12’ cable measures temperatures from within the drying or tented area for accurate control of drying temperature • Heavy duty construction, durability & thermostat with 12’ cord and modular plug.

The Eliminator is NEC ® compliant using standard 15amp household breaker

-601

1-877-

You Are Here: Energedry Eliminator In Action

Focus Drying Subfloor from Crawlspace Using Plastic Containment and Focusing Heat to Wet Materials.

Drying Garage Ceiling while Allowing Cars to Come In and out

Pressurize Wet Area’s To Dry Even Faster

ELE 6400 Is Putting Heated Air Into the Squirrel Fan Side of the Air Mover. The Air Mover is Pushing the Heated Air Into the Ceiling Cavity. The Thermostat Probe Is Put Into the Ceiling Cavity. This Gives the Actual Temperature Inside the Ceiling Cavity. Using 2 Heating Elements We Were Able To Get the Temperature to 110° In About 15 Minutes

Using the Eliminator and a Air Mover to Float Carpet (Heat Drying). We used 2 circuits of the Eliminator. We ducted the heat through Mylar ducting to the squirrel fan (air intake) side of a air mover. The thermostat sensor was on top of the carpet, but you can also put the sensor under the carpet. The sensor and thermostat are a very important part of heat drying. The thermostat allows us to control the heat used to dry the carpet, padding and subfloor.

ELE 6400, Eliminator and VapairVent System In Action

Pipe broke in bathroom upstairs. Water went down all 3 floors. The upstairs had very little damage. The middle floor had wet walls, contents and floorings. The basement got hit the worst as you can see.

Examples of Focus Drying Using the Eliminator

Example of Tenting A Concrete Floor and Ducted the Eliminator Under the Plastic.

Pipe Froze and Flooded Lower Area. We Subsurface Extracted the Carpet, Blocked the Furniture and Dried Floorings, Contents In Place. We Used the Eliminator Using 4 Circuits and the VapairVent. Everything Was Dry In 2 Days. Drywall and Insulation Were Also Dry In 2 Days. During Dryout (Part 1)

The Only Repair Done At This Time Was to Repair the Broken Pipe. We Set the Furniture Back In Place. The Homeowner Was Amazed. She Could Use Area Again Without Any Repairs. Water Damage from Frozen Broken Pipe After Drying (Part 2)