
|
1-877-432-8601 |
|
HeatPro700 Restoration Package Thermobile IMA 185 Compared To the Competition • Much Higher Efficiently 91% (Low efficiently heaters require higher btu’s and use more fuel to heat the same area) • Much Lower Noise Level, 74 Decibels (You can stand next to the ITA 75 and have a conversation, about as loud a air conditioner) • Very Low Amounts of Soot (Many heaters produce much higher levels of soot) • Only Uses 10.15 Amps of Power and is NEC ® compliant for a 15 amp circuit (To be NEC ® compliant you can use 80% of a circuit, a 15 amp can use 12 amps continuously and a 20 amp can use 16 amps continuously) |
|
1-877- |
|
-601 |
|
All prices shown above are subject to change without notice. (Some Restriction May Apply) |
|
HeatPro700 (700,000 Btu’s Net |
|
Optional 100 Gallon Fuel Tank, 10’ Quick Connect Fuel Line and Little Giant Pull Cart |
|
All Packages Subject To Change Without Notice |

|
Please Note: The High Limit Digital Thermostat That Comes On Our Restoration Packages Are Not Standard Thermostats. Most Standard Thermostats Go Up To 104 F. Our High Limit Digital Thermostats Work Up To 220F. You Set Your Desired Temperature, Set Either Centigrade or Fahrenheit and Then Set the differential Temperature. Example, You Set the High Temperature At 110°, the Heater Shuts Off. The differential Temperature Is the Temperature That You Set the Heater elements To Come Back On. 1°F differential temperature means the heat elements turn back on at 109F. The Heater Comes Back On Until It Reaches 110° Shuts Off and Comes Back On When the Temperature Drops To 109°. You Can Adjust These Temperatures At Any Time During Your Dryout. |
|
Ranco High Digital Limit Thermostat with 50’ with Modular Plug and Thermostat Plug
|
|
One Section of 25’ x 16” Mylar Ducting with Two 16” Duct Adapters, Two Quick Release Worm Clamps and Two 16” Quick Clamps |
|
One 16” Outlet by 2 x 12” Quick Connect Distribution “Y” Head |
|
Two Sections of 25’ x 12” Mylar Ducting with Two 12” Duct Adapters, Two Quick Release Worm Clamps and Two 12” Quick Clamps |
|
7” Chimney and Cap |
|
ITA 75 Drying System Clean And Effective Indirect Heat. The Most Efficient System Available! Powerful fans ensure high static pressure. This allows heater placement outdoors with clean dry heated air directed indoors to drying area. High temperature control safety thermostat comes standard. Efficient burning as a high pressure pump guarantees full combustion. High efficiency with low fuel consumption. Easy access filter makes maintenance easier. Large capacity fuel tank provides a minimum of 17 hours of continuous operation using onboard fuel tank and about 55 hours of continuous operation using 100 gallon external fuel tank option.
• Built-in reliability and portability. • Photoelectric flame safety sensor. • High temperature control thermostat. • Thermostatically controlled cooling process after shut down. • Standard (restoration packages only) thermostat for constant temperature control. • Durable powder coated finish. • Heavy duty wheels and handle provide mobility. • Grips and protection bar on front side. |
|
Please Note: 1 Gallon of Propane Produces 91,500btu’s
1Gallon of Diesel Produces 139,200btu’s.
That’s About 35% More Energy Compared to Using Propane
This Is Very Important If You Are Comparing Propane to Diesel When Buying a Drying System |
|
Certification by CSA International, a Third Party Certifying Body. Every ITA 75 is CSA Certified. |
|
How It Works |
|
ITA Working Principle |
|
HeatPro75 (RRQC) Package Price $11,449.99 Part Number DHHPRO75RRQC |
|
HeatPro700 Restoration Package |
|
Package Includes; HeatPro75 (240,000 Btu’s Net, 259,000 Btu’s Gross ) Ranco High Digital Limit Thermostat with 50’ with Modular Plug Machine Adapter One 16” Outlet by 2 x 12” Quick Connect Distribution “Y” Head One Section of 25’ x 16” Mylar Ducting Two 16” Duct Adapters Two Quick Release Worm Clamps for 16” Ducting Two 16” Quick Clamps Two Sections of 25’ x 12” Mylar Ducting Two 12” Duct Adapters Two Quick Release Worm Clamps for 12” Ducting Two 12” Quick Clamps 7” Chimney and Cap |
|
IMA 185 Enclosed in a Housing, Control Panel Mounted Inside the Duct Storage HeatPRO700 Sells for $37,200.00. Complete Restoration Package Below
|





|
The heart of the heater is combustion chamber and the heat exchanger. A powerful fan forces room and/or ambient air at high pressure into the heat exchanger where the air absorbs heat from the flue gases. The warm and dry air is then supplied into the room through the air outlet. The standard type of air outlet has an elliptical design suitable for installation of plastic duct for an optimal distribution of the warm air throughout the desired indoor area. |
|
|
High heat. |
|
|
Fixed outlet pressure pump for diesel or paraffin. |
|
|
Combustion chamber heat resistant up to 1500 °F. |
|
|
1-Way pipe system prevents fuel disturbance. |
|
|
Tank for 17 hours burning duration. 20% more than competitors. |
|
|
100% Clean and dry temperature circa 212 - 248 °F |
|
What Comes with the HeatPRO75 (RRQC) Restoration Package |
|
|
Restoration Package HeatPRO75 RFQC Quick Connect DRI HEAT Part Number DHHPRO75RRQC (240,000 Btu Net) |
|
|
Quantity |
Description |
|
1 |
HeatPRO75 (240,000 Btu) |
|
1 |
“Y” Connector, 16” x 12”, 1-!6” x 2-12” |
|
1 |
7” Chimney and Cap |
|
2 |
12” x 25’ Mylar Ducting (50’) |
|
1 |
16” x 25’ Mylar Ducting (25’) |
|
2 |
12” Quick Duct Adapters |
|
2 |
16” Quick Duct Adapters |
|
2 |
12” Quick Clamps |
|
2 |
16” Quick Clamps |
|
2 |
12” Worm Drive Clamps |
|
2 |
16” Worm Drive Clamps |
|
1 |
Machine Connection |
|
1 |
High Limit Digital Thermostat with 50’ Cord |
|
1 |
Operations Manual |
|
Price for DHHPRO75RRQC |
* $11,449.99 (RRQC) |
|
|
|
|
System above has 25” of 16” and 50’ of 12” Mylar Ducting |
|
|
Price Does Not Include Shipping |
|
|
Some restrictions may apply |
|
|
All Packages Subject To Change Without Notice |
|